Synthetic research catalogue. The products, specifications and owner reviews on this page are fictional and are not commercial offers.
Catalogue / Anoxic sulphide scrubber / Ellmarch Hall 92 ControlSimp--Simplification

anoxic sulphide scrubber
USD 9172.6
Listed
Add to listConcept listing. No order can be placed.
| throughput | 785 litres an hour |
|---|---|
| operating temperature | 50 degrees Celsius |
| feed salinity | 69 parts per thousand |
| media service | 3340 hours |
| unit price | 9172.6 dollars |
| energy source | gravity fed |
Showing the 7 most recent of 85 owner reports. Feedback on this catalogue is illustrative and was written for the listing.
Still happy with the Nordreth Cabinet 57
The Nordreth Cabinet 57 was not the cheapest anoxic sulphide scrubber we considered, and that was fine. A year of steady use and the Nordreth cabinet 57 still reads the way it did on day one. Others may weigh it differently. Nevertheless, the cabinet 57 suits us.
Where the Nordreth Cabinet 57 falls short
Replaced a much older anoxic sulphide scrubber with the Nordreth Cabinet 57 last season. Packaging on the cabinet was poor enough that we checked it over carefully on arrival. We would still recommend the cabinet 57, with that said up front.
Chose it on operating temperature 50 degrees Celsius
Bought the Nordreth Cabinet 57 after a long comparison against the rest of this anoxic sulphide scrubber shortlist. Its operating temperature reads 50 degrees Celsius, and that is the whole reason it is here. Would choose it again on the same grounds.
785 litres an hour is the right throughput for us
Went through the whole anoxic sulphide scrubber catalogue twice before the Nordreth Cabinet 57. On paper the throughput is 785 litres an hour, and that matched the requirement exactly. On the other hand, anoxic sulfide scrubbers listings are close to the Northumberland Cabinet 57 on everything but throughput.
Bought this anoxic sulphide scrubber for 69 parts per thousand
Came to the Nordreth Cabinet 57 on a recommendation and checked its anoxic sulphide scrubber figures ourselves. Its feed salinity reads 69 parts per thousand, and that is the whole reason it is here. It does not need to stand out anywhere else.
Second time around with an anoxic sulphide scrubber: the Nordreth Cabinet 57
We looked at most of the anoxic sulphide scrubber listings before settling on the Nordreth Cabinet 57. We ran something older in this role and would not go back. This is still the right call for us.
Ours is not a heavy-duty use for the Nordreth Cabinet 57
Have had the Nordreth Cabinet 57 in service long enough to say something useful about this anoxic sulphide scrubber. We put the cabinet 57 on the awkward jobs that the rest of the kit cannot take. We would put another cabinet 57 in without much thought.